您查看的文章来源于http://www.oklinux.cn
1、测试环境Linux 2.6.16-gentoo-r2 x86_64 AMD Athlon(tm) 64 Processor 3400+ GNU/Linux
2、硬件设备
波乐 5188 USB CDMA 1x Moderm， 联通新时空卡
3、需要软件：ppp wvdial
安装过程：
安装软件
#emerge ppp wvdial
修改用户组
运行配置生成文件
#wvdialconf /etc/wvdial.conf
Editing `/etc/wvdial.conf'.
Scanning your serial ports for a modem.
ttyS0<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud
ttyS0<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 115200 baud
ttyS0<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up.
ttyS1<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud
ttyS1<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 115200 baud
ttyS1<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up.
Modem Port Scan<*1>: S2 S3
ttyACM0<*1>: ATQ0 V1 E1 -- OK
ttyACM0<*1>: ATQ0 V1 E1 Z -- OK
ttyACM0<*1>: ATQ0 V1 E1 S0=0 -- OK
ttyACM0<*1>: ATQ0 V1 E1 S0=0 &C1 -- OK
ttyACM0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 -- OK
ttyACM0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK
ttyACM0<*1>: Modem Identifier: ATI -- ERROR
ttyACM0<*1>: Speed 4800: AT -- OK
ttyACM0<*1>: Speed 9600: AT -- OK
ttyACM0<*1>: Speed 19200: AT -- OK
ttyACM0<*1>: Speed 38400: AT -- OK
ttyACM0<*1>: Speed 57600: AT -- OK
ttyACM0<*1>: Speed 115200: AT -- OK
ttyACM0<*1>: Speed 230400: AT -- OK
ttyACM0<*1>: Speed 460800: AT -- OK
ttyACM0<*1>: Max speed is 460800; that should be safe.
ttyACM0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK
Found an USB modem on /dev/ttyACM0.
/etc/wvdial.conf<Warn>: Can't open '/etc/wvdial.conf' for reading: No such file or directory
/etc/wvdial.conf<Warn>: ...starting with blank configuration.
Modem configuration written to /etc/wvdial.conf.
ttyACM0<Info>: Speed 460800; init "ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0"
修改配置文件
#nano -w /etc/wvdial.conf
[Dialer Defaults]
Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
Modem Type = USB Modem
Phone = #777
ISDN = 0
Username = CARD
Init1 = ATZ
Password = CARD
Modem = /dev/ttyACM0
Baud = 460800
4、使用说明
#modprobe ppp
#wvdial
看到的结果如下：
--> WvDial: Internet dialer version 1.56
--> Cannot open /dev/ttyACM0: Input/output error
--> Initializing modem.
--> Sending: ATZ
ATZ
OK
--> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
OK
--> Modem initialized.
--> Sending: ATDT#777
--> Waiting for carrier.
ATDT#777
CONNECT
--> Carrier detected. Waiting for prompt.
~[7f]}#@!}!}!} }=}!}$}%j}"}&} } } } }#}%B#}%}%}&} oOb}'}"}(}"Hn~
--> PPP negotiation detected.
--> Starting pppd at Fri Apr 21 17:34:53 2006
--> Pid of pppd: 11116
--> Using interface ppp0
--> pppd: 5+
--> pppd: 5+
--> pppd: 5+
--> pppd: 5+
--> local IP address 220.205.12.112
--> pppd: 5+
--> remote IP address 220.192.8.6
--> pppd: 5+
--> primary DNS address 220.192.8.58
--> pppd: 5+
--> secondary DNS address 220.192.32.103
--> pppd: 5+
